09-29-2024, 05:02 PM
(09-29-2024, 11:59 AM)ana100 Wrote: Hey... just retrofitted leather full electrical heated R-Design seats. Changed the seat sensor, pin 11, and moved the pin to the new passenger side, right side. Wired those LIN connections, and power to pin 1 on both sides to fusebox. Still missing power connections due to wrong fusebox connections - so can not tell if it works.
Everything else works ... BUT seat memory function is mixed, i.e. pressing memory buttons on driver/left side, changes settings in on the passenger side.... I noticed that the pins 31 and 28 are reversed on driver/passenger connector. I'll try that and report back.
Maybe You have the same issue?
No luck. Checked the original seats, in driver seat, PSMD is indeed connected to pin 31 of big connector. But passenger seat, pin there's no pin in the seat harness. I guess this LIN is for the massage/support seats.
Now question is, where is the information, if the seat is driver or passenger? Is it programmed in to the PSMD module?