09-29-2024, 11:59 AM
Hey... just retrofitted leather full electrical heated R-Design seats. Changed the seat sensor, pin 11, and moved the pin to the new passenger side, right side. Wired those LIN connections, and power to pin 1 on both sides to fusebox. Still missing power connections due to wrong fusebox connections - so can not tell if it works.
Everything else works ... BUT seat memory function is mixed, i.e. pressing memory buttons on driver/left side, changes settings in on the passenger side.... I noticed that the pins 31 and 28 are reversed on driver/passenger connector. I'll try that and report back.
Maybe You have the same issue?
Everything else works ... BUT seat memory function is mixed, i.e. pressing memory buttons on driver/left side, changes settings in on the passenger side.... I noticed that the pins 31 and 28 are reversed on driver/passenger connector. I'll try that and report back.
Maybe You have the same issue?