Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bending Lights and Active High Beam
#35
(02-28-2023, 01:44 PM)TweakeNL Wrote: I’ve just found pair of the bendy lights. 
Will try to retrofit them. Not that hard probably as the HCM’s on the back has the same partnumber as the non bendys. :-)

I just checked on VIDA with my last day of subscription. 
The controller part number is the same for both with ABL and without ABL 32365274 (S60 2019+) 
However, the Headlamp Assembly part number is different with ABL (32314182) and without ABL (32314194). 

So, what you can do.  take your control unit and put it on the new  Headlamp Assembly you got. Then add the ABL from OrBit. If you change the unit, you will need to re program and calibrate it from VIDA. which then will be pain in the b*. VIDA does not let you to use a used module.
Reply


Messages In This Thread
Bending Lights and Active High Beam - by mamous - 02-02-2023, 06:58 PM
RE: Bending Lights and Active High Beam - by x119 - 02-04-2023, 08:29 PM
Bending Lights and Active High Beam - by SlapShot - 02-16-2023, 04:03 AM
RE: Bending Lights and Active High Beam - by IMAY2023 - 02-28-2023, 09:57 PM
Bending Lights and Active High Beam - by BeachBoy - 03-01-2023, 11:47 PM

Forum Jump:


Users browsing this thread: 7 Guest(s)