Air Suspension Calibration

[yalud]

[quote pid="800" dateline="1680041760"]

Well that was bad. It lowered the car down and set a suspension failure code. Does not go away on dtc clear.

Code is U2100 initial configuration not complete

Message on the dash is Suspension Failure stop safely

Car is definitely lower than comfort.

Probably on easy entry height or performance.

False alarm. It cleared itself on the way home. Carry on.

All it took was me mentally thinking F-U I’ll just get a 3 day VIDA and clear you myself. And it went away.

O, looks like.my first foray into this went this way too...... currently saying 'Suspension Failure Stop Safely'....

Looking at the SUM DID looks like it's in Service Mode..and because it's in service Mode won't allow me to do the calibration...

Any ideas how to manually set it back to Operational mode or restart the Calibration?

If it was anything like mine, the suspension code clears after you drive it for a short time. While the message is active the suspension will not allow ride mode changes.


Sent from my iPhone using Tapatalk
[/quote]


Any luck? I also keep getting: 
Reason for "leveling not possible", service mode active:
01 Yes

Then I'd have to drive over 50km to clear the error. I would try again to no avail