09-03-2024, 02:22 AM
(09-02-2024, 08:07 PM)ghanshyamkamani@gmail.com Wrote: Hi,
I am new to this forum and think about to have HUD that shows speed and navigation instructions on my 2019 XC90. Anyone ever figure it out how to do this, what all parts required? And what would be the procedure?
I have HUD but that just shows collision red light, nothing else.
First, you'll need to find a used HUD. Not that a problem these days from ebay.
you'll need to buy the VLS cable (from HUD to DIM), some connectors and pins, the trim that covers the HUD. (Don't know if your current one and the regular one are the same size)
You'll need to pull out the dashboard, cut the hole for the HUD (again don't know if your current one is the same size)
Connect the HUD, configure via orbit and put the dash back.
But before doing all that, test it first.
You can only pull out the DIM, connect and wire it. Then configure it from Orbit. see that is working only then pull out the dash if you still want to go with it.