08-20-2024, 05:38 PM
(This post was last modified: 08-20-2024, 05:53 PM by Aliaksandr.)
I drew the holder. Here is the stl antenna mount.
https://drive.google.com/file/d/1weeM6Xf...sp=sharing
![[Image: IMG-20240820-203100.jpg]](https://i.postimg.cc/kBLYjNkY/IMG-20240820-203100.jpg)
![[Image: 2024-08-20-203145.png]](https://i.postimg.cc/6yxGYyML/2024-08-20-203145.png)
This is the pinout.
https://drive.google.com/file/d/1weeM6Xf...sp=sharing
![[Image: IMG-20240820-203100.jpg]](https://i.postimg.cc/kBLYjNkY/IMG-20240820-203100.jpg)
![[Image: 2024-08-20-203145.png]](https://i.postimg.cc/6yxGYyML/2024-08-20-203145.png)
This is the pinout.
![[Image: 2024-08-20-203943-2.png]](https://i.postimg.cc/pys1bMnS/2024-08-20-203943-2.png)