08-10-2024, 06:56 AM
Hi
Thanks for your response.
I got the official manual from Volvo for my car but this is for adding park assist complete when car is originally equipped with only rear paring sensors. And this is what my car has. I'm not planning to add parking assist as I found it very slow and I won't use it at all. But the part for forward sensors is very useful.
I'm ok with installation but what I'm struggling with is parts selection. I have MY21 V60 T6 PHEV (no fog lights available) and I know a guy in Volvo dealer and he send me list of parts needed for this retrofit:
32233122 - harness
32209488, 32209487, 32209360 - sensors.
Obviously I don't need 32209360 as these are side sensors used with parking assist. Something doesn't seems to be right as the harness he send me is (according to polish webpage with Volvo parts) for option VP02 (which is mine option) - only rear parking sensors. Beside of what he gave me, the manual mention (same as you did and IMAY) that there need to additional harness from bumper to CEM. I checked that for my car on-line and found out that for my model there were only two harnesses used. According to my car original outfit I should have the harness already installed (bumper to CEM). So this need to be confirm first. And now I need to find out if my CEM is Hi and no LO.
I have already spend hours in comparing different options, harnesses, studying drawing etc. and I don't want to end up with parts I won't be able to use. I want only original parts so I wont bother with changing plugs or buying anything from Aliexpress. But I need to find out correct parts somehow or get a VIN (not a problem) with park sensors installed and somehow check parts list for that car by VIN. I didn't find a page capable of searching parts with VIN except of https://www.volvopartscounter.com/ which shows error when searching using my VIN.
I might get the wheel off today or check CEM for correct harnes. At least then I will get something out of the way.
Thanks for your response.
I got the official manual from Volvo for my car but this is for adding park assist complete when car is originally equipped with only rear paring sensors. And this is what my car has. I'm not planning to add parking assist as I found it very slow and I won't use it at all. But the part for forward sensors is very useful.
I'm ok with installation but what I'm struggling with is parts selection. I have MY21 V60 T6 PHEV (no fog lights available) and I know a guy in Volvo dealer and he send me list of parts needed for this retrofit:
32233122 - harness
32209488, 32209487, 32209360 - sensors.
Obviously I don't need 32209360 as these are side sensors used with parking assist. Something doesn't seems to be right as the harness he send me is (according to polish webpage with Volvo parts) for option VP02 (which is mine option) - only rear parking sensors. Beside of what he gave me, the manual mention (same as you did and IMAY) that there need to additional harness from bumper to CEM. I checked that for my car on-line and found out that for my model there were only two harnesses used. According to my car original outfit I should have the harness already installed (bumper to CEM). So this need to be confirm first. And now I need to find out if my CEM is Hi and no LO.
I have already spend hours in comparing different options, harnesses, studying drawing etc. and I don't want to end up with parts I won't be able to use. I want only original parts so I wont bother with changing plugs or buying anything from Aliexpress. But I need to find out correct parts somehow or get a VIN (not a problem) with park sensors installed and somehow check parts list for that car by VIN. I didn't find a page capable of searching parts with VIN except of https://www.volvopartscounter.com/ which shows error when searching using my VIN.
I might get the wheel off today or check CEM for correct harnes. At least then I will get something out of the way.