V90/XC90/S90 HK AUD .VBF Files

[spacemanspiff]

Well, that's very good news. Now there is room for creativity).

I think the woofer speakers and the subwoofer are the same in Gen1 and Gen2. The tweeters in the rear doors are identical. The tweeters in the front doors are different, but I want to try to cut capacitors and listen. The midrange and surround speakers will have to be changed.
You are correct about the IHU. It doesn't have a Jazz mode and I have a question about the subwoofer settings because I almost don't hear it with the Gen2 amp.

Thanks for your help and good explanation. I will share a result at the end.

Looks like the v60 HK amp i bought was in fact a V90 HK amp, would anybody have the v60 HK file to share with me? Would be lovely to kill my open speaker faults.

Interestingly enough, I have a V90 and I went from HP to HK. I got my donor HK amp from an XC60 and was able to flash it with the proper V90 configuration. All the speakers work as expected, but I still have the B1A06 and B1A08 DTCs.

Well shiieet. Effectively it will be no difference for me as i drew a wire from amp to back door tweeters, and the fault for mid rear speakers missing will still live on. ?

Hard to say. I drew new wires to both the front and rear doors. But I still had the codes.

Were you able to find a diagram that shows the speaker numbering, i.e. that speaker "6" and "8" are for the rear door mids?