Enabling Pilot Assist and Adaptive Cruise Control

[IMAY2023]

Hi,

Yes, the lane will change by itself when overtaking slower moving vehicles whit PA engaged and the green steering wheel active.
When I activate the turn signal it will accelerate and change the lane if my set speed is higher than the vehicle in front of me.
It will not work if you want to change lanes when you are alone on the Highway ) and why would anyone do that?
Update: Just remembered that I have changed the Lane when I was not trying to overtake another car, I think I had level 2 at that time. Will try this again when will have the chance and report it here.
My transmission is automatic.
This are my settings:

023 CRUISE CONTROL - 09 Adaptive cruise control stop & go, level3 (was working also with the level2, did not had the chance to try it with level 1)
145 TRAFFIC JAM ASSIST - 05 With Traffic Jam Assist, Level 4 
150 LANE KEEPING AID - 02 Lane Keeping Aid 
310 FRONT SIDE RADARS - 01 Without front side radars 
312 LANE CHANGE ASSIST - 03 Lane Change Assist level 2 
314 ADAPTIVE CRUISE CONTROL VERSION - 01 ACC version 1 
316 EMERGENCY LANE KEEPING AID - 04 eLKA level 3 
479 FRONT CROSS TRAFFIC ALERT - 01 Without Front Cross Traffic alert
494 HIGHWAY ASSIST - 01 Without highway assist

I also have enabled:

238 TOP DAMPING, BRAKES - 02 Friction brake actuator with top damping

Hello, after adding ACC and PA to my car, everything works fine, but the classic cruise control option is gone. Is it possible to set it to regular cruise control + ACC + PA? 

My car is V60 2020 T4 and the settings are:


Code:
023 - Cruise Control - 04 Adaptive cruise control stop & go, level1
145 - Traffic Jam Assist - 05 With Traffic Jam Assist, Level 4
314 - Adapter Cruise Control Version - 01 ACC version 1

After enabling the ACC and PA via above configuration, you should see a new icon on the sensus for regular CC.  If you enable that from Sensus, you won't have ACC and PA if you would like to toggle between (ACC / AP)  and CC.