Can s90 seats be fitted to S60

[IMAY2023]

Hello again everyone. I got the power from fuse 40 to pin 15. Also connected pin 30 purple/white to purple white can under the plastic trim same goes with pin 29, purple green to purple green can. But I can’t get the electronics in the chair to work, it’s there something I’ve done wrong that I can’t think of? Any help is appreciated. Best regards, Oscar

PIN 15  Is power for SEAT COMFORT MODULE. (side support and massage seats)  ONLY!  

Since you have mentioned the CAN bus PINs, I am assuming you have replaced the manual seats with full electric ones. So, you are missing main two power wires for each seat. 

There are two of them; One shared (P and D) and another individual for each side. 

PIN 16 (shared by both passenger and driver ) goes to CF 24 
PIN 3 (Passenger) goes to CF 56
PIN 3 (driver) goes to CF 50

PIN 6 goes to ground.