06-10-2024, 08:00 PM
After retrofitting rear heated and ventilated seats I tested this to be able control rear seat heating and ventilation from the center display "Rear climate control"
Changing the setting "175 HVAC VARIANTS" to 02 HVAC large 4 zone ECC enables the rear climate control under the climate control main page. Option appears at the top tabs of the climate control screen.
However, it breaks the climate system.
CCM throws DTCs
1) missing temp sensors on the rear floor air vents (under each front seat)
2) missing temp sensors on the rear console air vents although 339 SECOND ROW CENTRE VENT is set to 01 without
3) missing actuators for opening and closing the floor vents.
In addition to DTCs,
When you change the output vents from the center display, it does not do anything. In fact, no air coming out from any vent regardless which ones you choose.
There are 3 types of rear seat heating switch.
1) Basic one that has only two buttons controls only heating level for each side.
2) Digital, controls both air vent speed and heated rear seats. This switch is turned on only when "175 HVAC VARIANTS" is set to 02 HVAC large 4 zone ECC.
3) Digital, controls both air vent speed, heated and ventilated rear seats. Do not know if it turns on without setting "175 HVAC VARIANTS" to 02 HVAC large 4 zone ECC. Because I could not find a used one to buy and test it.
At the moment, I installed the basic button "1" above so at least I can use the heated rear seats without breaking the climate control.
Is there anyway to activate the rear climate control part on the center display without messing up the CCM. In order words, trick the CCM not to activate 4 zone while activating only on center display?
Changing the setting "175 HVAC VARIANTS" to 02 HVAC large 4 zone ECC enables the rear climate control under the climate control main page. Option appears at the top tabs of the climate control screen.
However, it breaks the climate system.
CCM throws DTCs
1) missing temp sensors on the rear floor air vents (under each front seat)
2) missing temp sensors on the rear console air vents although 339 SECOND ROW CENTRE VENT is set to 01 without
3) missing actuators for opening and closing the floor vents.
In addition to DTCs,
When you change the output vents from the center display, it does not do anything. In fact, no air coming out from any vent regardless which ones you choose.
There are 3 types of rear seat heating switch.
1) Basic one that has only two buttons controls only heating level for each side.
2) Digital, controls both air vent speed and heated rear seats. This switch is turned on only when "175 HVAC VARIANTS" is set to 02 HVAC large 4 zone ECC.
3) Digital, controls both air vent speed, heated and ventilated rear seats. Do not know if it turns on without setting "175 HVAC VARIANTS" to 02 HVAC large 4 zone ECC. Because I could not find a used one to buy and test it.
At the moment, I installed the basic button "1" above so at least I can use the heated rear seats without breaking the climate control.
Is there anyway to activate the rear climate control part on the center display without messing up the CCM. In order words, trick the CCM not to activate 4 zone while activating only on center display?