06-06-2024, 12:56 AM
(06-05-2024, 06:00 PM)Waka666007 Wrote: Hello,
I have some problems. In my v90 CC 2018 I changed semi automatic seats for ventilated full automatic from XC90.
1. How to make new wires for memory button?
2. I have multifunction button but I don't have visualisation on the screen.
3. Now i have some fault with horizontal and vertical sensor from mirrors.
Anybody can help?
You need to provide more details.
Which exact features does your original seat(s) have (each side)?
Which exact features does your new seat(s) have (each side)?
Do your original seats have tracking sensors? (127 SEAT TRACK SENSORS) this effects your SRS system.
Does your original passenger seat have occupant sensor or not?
For the memory buttons, which side?
In general you just need to rewire the harness on the door trim(s). The inner (door) harness has the wiring for the memory switch from the connector of trim harness to the door module.
So, either you find a used / new door trim harness or you need to rewire.
I enclosed complete wiring diagram for V/S 90 series.
Regarding the mirror sensors. The position of the mirrors are stored in the Driver seat module. If your original driver seat do not have memory option, most likely there are no position sensors inside your mirrors.