05-07-2024, 05:22 PM
No worries spacemanspiff, I don't think we are dealing with the same situation here. As you have found, it looks like on the H/K system amps, the hardware is shared between the 60 and 90 series. Until you brought it up, I had never looked into these.
IMAY2023, in the case of the B&W we know the hardware is different between 90-series and 60-series on the "Gen 1" B&W. So that could be a problem, if the HW does not use the same, or similar, software.
The "Gen 2" B&W looks like it is using shared HW between the 60 and 90 series. So that one should be a matter of software as well.
I'll work with you spacemanspiff, and we will see if it works.
IMAY2023, in the case of the B&W we know the hardware is different between 90-series and 60-series on the "Gen 1" B&W. So that could be a problem, if the HW does not use the same, or similar, software.
The "Gen 2" B&W looks like it is using shared HW between the 60 and 90 series. So that one should be a matter of software as well.
I'll work with you spacemanspiff, and we will see if it works.