Can s90 seats be fitted to S60

[Oscarv90raggarn]

Hey everyone. I tried to switch from semi electric seats to full electric seats in my s90. Sadly it wasnt plug and play. Ive tried reading through the forum 100 times but i cant seem to find anyone that had the same problem.

I looked att the old semi electric seats connector. Where i have the following pins, 16, 22, 23, 32.

The new seats have 15, 16, 22, 23, 29, 30, 31, 32. So i am missing 4 pins. 

Has anyone done This? Where do i have to get the new pins from? Im guessing that there is some sort of CAN cabels needed. Where do i get This signal from if thats the case.

Any answers are apriciated since i really want This to work. Best regards, Oscar.

Here is the S90 diagram.  You are missing the CAN low, CAN High, power and LIN.

Thanks! Sadly i am terrible at reading wiring diagrams. I can see that there are a bunch of lin cables, which one is it that i need, and the power cable where should that come from? Can i splice in to a fuse and take power from there?

Found the can cables thanks to pliind so got that solved but still missing LIN and Power