Keyless Entry

[BeachBoy]

The two door ones have + pin 1 (bn/ye) and - pin 3 (ye/wh) wires going to connectors 94/509 (left) and 94/510 (right) pins 11 (+) and 14 (-)



I don't have specific 94/509 and 510 data but these are the rear door harness and floor harness images



The cabin one has + pin 1 (bn/ye) and - pin 3 (pk) wires going to connector 94/409  pins 9 (+) and 10 (-)


This is the console harness, I don't have the 94/409 specific data


The trunk one has + pin 1 (vt/gn) and - pin 3 (ye/vt) wires going to connector 4/56.FL (directly to CEM) pins 22 (+) and 3 (-)


This shows the same signals value in the CEM table showing the match