04-15-2024, 10:43 PM
One thing I noticed is that your configuration is set to rear park assist only. At what state you read the DTCs? and got the message "Park assist not available" ?
If you connected (4 front > the picture and 4 rear) 8 sensors in total, you must put the setting to 03 Parking assistance rear and front; only then test it and check the DTCs.
Do not connect 6 sensors at the rear and 4 sensors in the front, there is no such configuration for that setup. It will short and cause problems or conflicts in the CEM.
Similarly, do not connect all 12 (6 rear and 6 front) sensors and set the configuration to 02 or 04.
The number of the connected sensors must match to the configuration.
02 Parking Assist Rear > 4 rear sensors only.
03 Parking Assist Rear and Front > 4 front and 4 rear (total 8) sensors only.
04 Parking Assist, Semi Automatic > 6 front and 6 rear sensors only.
If you connected (4 front > the picture and 4 rear) 8 sensors in total, you must put the setting to 03 Parking assistance rear and front; only then test it and check the DTCs.
Do not connect 6 sensors at the rear and 4 sensors in the front, there is no such configuration for that setup. It will short and cause problems or conflicts in the CEM.
Similarly, do not connect all 12 (6 rear and 6 front) sensors and set the configuration to 02 or 04.
The number of the connected sensors must match to the configuration.
02 Parking Assist Rear > 4 rear sensors only.
03 Parking Assist Rear and Front > 4 front and 4 rear (total 8) sensors only.
04 Parking Assist, Semi Automatic > 6 front and 6 rear sensors only.