04-06-2024, 09:15 PM
I don't understand why would you like to disable the exterior sound but here is how to do it with a simple trick without changing any configuration and removing the fuse.
1) Locate the speaker. (On T8 models, it's under the rear bumper passenger side).
2) Disconnect the speaker and measure the resistance of the speaker (positive and negative) with ohm meter.
3) Get a resistor little bit higher that the reading. Usually 20k ohm should be enough and connect the resistor between positive and negative wires coming to the speaker.
There you go, Car will think that there is a speaker and when triggers it, nothing will sound and fuse will not pop up since you have the resistor there.
This is the same trick people use for airbag warning lights to pass the inspection tests.
1) Locate the speaker. (On T8 models, it's under the rear bumper passenger side).
2) Disconnect the speaker and measure the resistance of the speaker (positive and negative) with ohm meter.
3) Get a resistor little bit higher that the reading. Usually 20k ohm should be enough and connect the resistor between positive and negative wires coming to the speaker.
There you go, Car will think that there is a speaker and when triggers it, nothing will sound and fuse will not pop up since you have the resistor there.
This is the same trick people use for airbag warning lights to pass the inspection tests.