03-26-2024, 09:59 PM
(03-26-2024, 05:45 PM)IMAY2023 Wrote: Well, It seems you've tried almost everything and I guess you have two options in front of you. But before any of those below, if you haven't checked and compared the software versions of each HCM, that would be good start point. If the software versions are different, that might explain the odd behavior.
1) You can diagnose yourself by using a bidirectional diagnostic tool or VIDA. VIDA has diagnostic sequences and user friendly commands built in for ECUs. In addition, you can do total upgrade yourself or reload the HCMs. Of course you will need to restore to defaults before connecting the VIDA.
Maybe Orbit already has all the relevant ECU commands for testing, I don't know.
2) Restore to defaults and take it to dealer.
Re: checking software for both HCMs, I did that and they were identical except for the last digit in each field. I had assumed that was the LH vs RH distinction (instead of a software difference) but obviously I'm not sure. It's possible they're not on the same overall software.
I would love to continue working with @Power6 to find a solution within Orbit as I have a feeling I'm not the only one who has or will ever have this happen (even if it wasn't caused by config changes). It's possible some functionality that Vida has could be added to Orbit to resolve it. Obviously the module isn't completely bricked or I would think we'd see some failures either through diagnostic tools or on the dash.
Also, thanks so much for all of your help! Really appreciate not being on my own to figure it out
