03-25-2024, 04:47 PM
First of all make sure your both headlights are aligned properly. (height and side). If your left headlight is set to low, it simply does not have the required threshold to go down first and up again.
I replaced my headlights with the used bending ones and the used ones I received were way of the alignment. They were set too low.
You can go to a shop to align them or simply do it yourself. There are many videos on youtube. Principle is same for types. You have two screws on each headlight. The inners ones are up/ down and outer ones are for L/R.
I replaced my headlights with the used bending ones and the used ones I received were way of the alignment. They were set too low.
You can go to a shop to align them or simply do it yourself. There are many videos on youtube. Principle is same for types. You have two screws on each headlight. The inners ones are up/ down and outer ones are for L/R.