Yes, I said it wrong, sorry, only the right fog light pin 72 works.
I have reviewed all the connections again and tested continuity with positive 44 and GND pin 45 and everything is perfect.
I have checked all the pins of the front sensors 1+ /2 signal/3 GND and everything is correct.
The left fog light has continuity with the cem12 pin and with gnd.
edit:
I had the polarity of the right fog light reversed. The light works with direct 12v. But it doesn't work installed.
Could I have blown a fuse or relay?
Is there a fuse that manages all this?
Please help me, I don't know where to go.
Thank you very much for the help.
[adjunto=255][adjunto=256][adjunto=258]
I have reviewed all the connections again and tested continuity with positive 44 and GND pin 45 and everything is perfect.
I have checked all the pins of the front sensors 1+ /2 signal/3 GND and everything is correct.
The left fog light has continuity with the cem12 pin and with gnd.
edit:
I had the polarity of the right fog light reversed. The light works with direct 12v. But it doesn't work installed.
Could I have blown a fuse or relay?
Is there a fuse that manages all this?
Please help me, I don't know where to go.
Thank you very much for the help.
[adjunto=255][adjunto=256][adjunto=258]