Tire pressure sensors

[cholo07]

Hi
I have wheels without TPMS is it possible to delete the warning so i dont have to buy new sensors

---

What happens if we have two sets of wheels? Would we want tpms sensors in each? What would we do if we changed wheels? Just use the calibrate button for the new set? What if we have one set of wheels with tpms and the other without? Do we just changed the config back to factory "store pressure" indirect settings?

Hello!
My car is XC 90 T6 2016.
I have original wheels 275/40r21 and they have absolute pressure sensors installed. The screen shows the pressure values:

I ride on these wheels in the summer.

For the winter I bought myself complete wheels 235/60r18. After installing the wheels, calibration was unsuccessful, and the TPMS fault icon was displayed on the driver’s screen:


Thanks to Orbit, I changed the appropriate settings and switched to an indirect pressure control system and got the following picture:

The error on the driver's screen naturally also disappeared.

Now my hands are free! When spring comes, I’ll put on summer tires and just change the system parameters!

P.S.: I like dTPMS better, so maybe I’ll buy sensors and install them in the wheels next season. In general, with Orbit you do as you like))

P.P.S Both times, after installing the wheels (I pump the pressure to 2.6 bar), I simply turn on the calibration and after 5-7 minutes of driving the system begins to show values in one case, green circles in the other.

How did you do to get rid of the warning
Is it 019 and 020 you change to Without ?
see picture