Retrofit Keyless Entry

[IMAY2023]

For the next ones then

Pure Gold!

I also got more pictures from paunionutz. 

This is the last connector for the rear antenna. 

---

My google-fu brings me to beleive that his is the part-nr for the FL connector 31268607. Can only find russian sites for aquiring however...

If anybody can name the pin perhaps we can find something on aliexpress like for the FO connector

https://mk4-wiki.denkdose.de/artikel/bcm/bcm_ausbauen there is a very similar Ford Plug and in some kind of forum they found out that these are just standard 0.64 Pins in there
https://mou.sr/3v6O9c0 maybe these?! i've ordered 100 of them so i can test but currently i need my car
As i can see you guys managed to solve my a and b pillar issues. I have vacation in 2 weeks, so I will tackle the project again

Welcome back to the jungle   I'm happy you have not given up all hope yet. Please get back with feedback on the last pins it will be the last peice of the puzzle. 

Also during my inspection of the harnesses i think it's possible if somebody wants to do a shortcut they can use the hole in the door connectors where the mirror cameras cable should come through (only works ofcourse if you do not have cameras in your mirrors..  )

  the harness i bought was with camera so this is occupied but for somebody just pulling the one wire through it is an option.

Here is the part number 30656698 for the repair terminal you need for the most part of the CEM connector.  Check this out for the other two types.  The bigger ones are for high amp circuits. Yours is just a signal same as the parking sensors.