Retrofit Keyless Entry

[Pliind]

I just finished wire front doors. For the passenger side, you have to remove glovebox and is a window in the foam  isolation on the A pillar.  You open that window and you find a rubber plug in the pillar. Extract that plug, and the male external connector has an security pin under. You have to push that pin and connector slide in interior.
For the driver side you have to slide the carpet under the brake pedal, release the hood open lever, and under the CEM you will find the same window in the foam. The procees is the same like the passenger side, but the room is more tight

Great progress! Have you taken any pictures in the process?