Default to active high beams?

[xc60P*]

Thanks - that's helpful. Just for others who may stumble upon this thread -- in spite of the U2300 error, I just verified the full functionality of the US-spec Pixel headlamps under the Type B (106 -> 12) setting above.

Specifically,

• Welcome / Goodbye pattern (or whatever that is called)
  
• Side reflector lights (the orange ones, which I don't think are present on the EU spec, but still work)
  
• Matrix functionality
  
• Auto leveling
  
• Beam steering
  

I couldn't really see a difference in the above vs. when 106 was set to Type A (11).

I'll check again if the DTC shows up tomorrow, but either way seems like it may be more informational in nature given the Type A/B hardware seems fairly similar.

Cheers,
AP

Following up on this I’ve just got adaptive high beams to work. Did the change from matrix a to matrix b make any visual difference?  I don’t need “always on”. I can turn a know each time. 
Thx.