Not sure if Orbit can flash all the ECUs. I let @power to comment on that. However, even if Orbit could flash the SCL, you must have have the SBL, DATA and EXE vbf files.
SBL file is used to put the ECUs to programming mode (boot loader for software download).
DATA and EXE vbf files are the actual software files are needed to be installed on the ECUs.
In addition, some ECUs require config files while software installation and you need to find the correct software part numbers too.
As a result it's a long shot, your best option is purchasing VIDA subscription and reloading the new SCL officially. It's easy; as soon as you read the car with VIDA, it will detect the hardware changes and you will see which software to order. You can also do total upgrade (does not cost money). At the same time, you can capture all the VBF files for feature use.
Good luck .
SBL file is used to put the ECUs to programming mode (boot loader for software download).
DATA and EXE vbf files are the actual software files are needed to be installed on the ECUs.
In addition, some ECUs require config files while software installation and you need to find the correct software part numbers too.
As a result it's a long shot, your best option is purchasing VIDA subscription and reloading the new SCL officially. It's easy; as soon as you read the car with VIDA, it will detect the hardware changes and you will see which software to order. You can also do total upgrade (does not cost money). At the same time, you can capture all the VBF files for feature use.
Good luck .