02-03-2024, 09:44 AM
(02-02-2024, 07:03 AM)gringo007 Wrote: Problem solved. Needs to connect and route two new wires for LIN comms, so total would be not 9 wires like in wiring connection diagram, but 10 wires in one headlamp unit. Additional wire is the pin No 4 from head lamp to the CEM (left lamp to CEM pin EN5 and right lamp to CEM pin EN6) all errors gone, as well no need high sensors to be installed.
106 i programmed 08 (type B)
Perfect, thanks for letting us know.