02-02-2024, 05:36 AM
No, you do not test resistance, you test the continuity.
There are three wires,
1 of them is the common wire. the other two are individual for each paddle.
You should test the continuity between common and individual for each paddle. When you press the paddle you'll see value change at the same time if you press the other paddle value does not change.
There are three wires,
1 of them is the common wire. the other two are individual for each paddle.
You should test the continuity between common and individual for each paddle. When you press the paddle you'll see value change at the same time if you press the other paddle value does not change.