Thanks for the report! So this could be something that was due to a software update, some unknown changed behavior. It's not unheard of, that some config changes might need some time to take effect, usually some module needs to "sleep" and wake up to take new settings. This is why OrBit restarts some modules in "post-programming", to shortcut that process for you, for some known settings it forces them to take effect right away.
Not enough info yet to say, but I am going to check with the other user and see if he can check that the PA/ACC comes back after a while.
Not enough info yet to say, but I am going to check with the other user and see if he can check that the PA/ACC comes back after a while.