(12-08-2023, 03:04 PM)axelemils Wrote: I have a hard time understanding the Air Suspension Calibration function. None of the stated values are even close to the real life measurements on my car. While the scan states that all 4 wheels are at 380mm +/- 2mm, when I measure, like the info box tells me, the front is 430mm and rear is 480mm. Is the reading wrong, am I measuring incorrectly? Like the box says, I measure from the center point of the wheel, straight up until I hit the black plastic on the fender around the wheel house. Volvo V90 CC MY18
Hey it's possible I don't have the correct specs loaded for the V90CC. I will check on it and fix it if needed. FYI the only affect here is the "detected height" that is displayed will not be correct. If you measure the heights and calibrate it will work fine. The specs on height are only used as a reference to create the "detected height" display, so you can have a "sanity check' on your measurements. Those specs are not used at all in the actual calibration, the SUM is just given the height measurements and it adjusts itself accordingly.