Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
025 Seat Heat Calibration
#4
I have a 23 V60 with a default of 6 as well. I used my infrared thermometer to check the seat surface temps and at 6 it read roughly 75/78/80
degrees F. At 10, all of these were about 5 degrees higher and config 1 they were 5 degrees lower. That’s surface temp though, so compressed with body weight that’s going to be hotter for sure but relatively about the same range I’d guess.

I prefer lower seat temps and at 1, the lowest setting is much better. Mid is like the old 1,high like the old 2 if that makes sense.


Sent from my iPhone using Tapatalk
Reply


Messages In This Thread
025 Seat Heat Calibration - by Pau1ey - 09-02-2023, 03:42 AM
RE: 025 Seat Heat Calibration - by Pau1ey - 09-29-2023, 08:38 PM
RE: 025 Seat Heat Calibration - by axelemils - 12-08-2023, 10:17 AM
025 Seat Heat Calibration - by STWAGguy - 12-08-2023, 09:42 PM
RE: 025 Seat Heat Calibration - by Christophermcg - 01-03-2024, 03:53 AM
025 Seat Heat Calibration - by Pau1ey - 01-03-2024, 04:18 AM
RE: 025 Seat Heat Calibration - by EricSan - 02-13-2024, 01:54 AM
RE: 025 Seat Heat Calibration - by BeachBoy - 02-13-2024, 02:30 AM
RE: 025 Seat Heat Calibration - by EricSan - 02-13-2024, 05:38 PM
RE: 025 Seat Heat Calibration - by Apansson - 09-14-2024, 01:20 PM
RE: 025 Seat Heat Calibration - by Pau1ey - 09-15-2024, 04:26 PM
RE: 025 Seat Heat Calibration - by Apansson - 09-15-2024, 07:09 PM
025 Seat Heat Calibration - by Pau1ey - 09-15-2024, 08:58 PM
RE: 025 Seat Heat Calibration - by Apansson - 09-19-2024, 06:29 PM
RE: 025 Seat Heat Calibration - by Apansson - 09-20-2024, 08:47 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)