Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Non-bendy LED to Bendy LED headlamps swap
#15
(09-30-2023, 01:53 AM)glennda5id Wrote: It looks like the 2019+ XC90 went to a new design. The 2016-2018 Had a total of 4 control modules plugged in. And they seemed to have got it down to 2 with the newer models. Still curious if I can swap in 2019+ lights. I would of course need to swap in pairs.

The 2016-2018 items number 3, 4 and 5 have all been replaced with a single HCM module on the 2019+

See Attachment of 2016-2018

Have you had any further luck? 

I have a 2017 XC90 with bendy LEDs and the 4-module headlights. 
Apparently one of the locating nubs is broken off and allowing massive moisture ingress. Now the low/high beam no longer work and the car is throwing a Low Beam Malfunction error, and a Headlight System Malfunction error as soon as the low beams come on. 

Where new headlights are $3k + modules & coding, I am absolutely not buying anything new, and the plethora of part numbers on ebay, none of which match the online Volvo IPC or superseded part numbers really makes me weary. 

The newer 2-module lights are more plentiful used, but I assumed they weren't interchangeable. 
The connector is the same, but the populated pin count and locations are different, with at least one pin not common between the two.


Attached Files Thumbnail(s)
       
Reply


Messages In This Thread
RE: Non-bendy LED to Bendy LED headlamps swap - by Northern - 11-17-2023, 05:08 PM

Forum Jump:


Users browsing this thread: 7 Guest(s)