02-02-2023, 09:01 PM
I'd agree, as "not reccomended" as it is, you can def config flash the car without being connected to power, there is time. Just don't dally around poking at stuff for a while in Active Mode...
Expert Tip: If you want to speed up the flashing process, on Experts Toolbox tab there is a feature to "skip checks" on programming. If you enable, OrBit skips all the "non-essential checks" like all ECUs responding, all ECUs in programmin mode. It's really there to get around if a module or two is being a pain and won't pass pre-programming checks so OrBit fails the flashing process, it's best to run all the checks, but if you are in a hurry...
Expert Tip: If you want to speed up the flashing process, on Experts Toolbox tab there is a feature to "skip checks" on programming. If you enable, OrBit skips all the "non-essential checks" like all ECUs responding, all ECUs in programmin mode. It's really there to get around if a module or two is being a pain and won't pass pre-programming checks so OrBit fails the flashing process, it's best to run all the checks, but if you are in a hurry...