Air Suspension Calibration

[Partridge]

At -30mm ride quality suffers considerably. I’m going to be backing off a bit.

Not sure what the official numbers are but my measurements are
Off road: +40mm
Comfort: +/- 0mm
Eco: -5mm
Sport: -10mm
Easy entry: -35mm

So at -30mm your Comfort setting is only 5mm higher than the old Easy Entry height.

The way the lowering works is the same as using lowering links, but instead of fooling the height sensors in hardware you’re fooling them in software by spoofing the calibration.

Off road mode will be lower by the same amount.

This differs from the Heico system which can apparently modify each mode separately.


Sent from my iPhone using Tapatalk