Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding motion / tilt sensors to CMA vehicles
#3
Looking at the parts sites, like Riley, you can see the parts notes show:

31652493
Variant code: L102 and L801

31652494
Variant code: L102 and L802

I don't know why LI02 (Trunk release) matters, but it's the same for both anyways. The "L8" variant code is for "Inclination sensor", 01 is without, 02 is with.

Part 31652494 should do the trick for you. When I swapped on my S60, the parts are externally identical. 

I might suggest to buy a used one and not new...used will be already loaded with software, so you won't need to deal with that. It probably can be dealt with but could be tricky if we can't locate the software to flash it with OrBit, or VIDA won't load it, if it sees it as a different "part" which it may or may not. I got a used BBS, cheaper and avoid those possible issues. (Here's an example, lots of EU sellers of recycled parts shipping into the US)
Reply


Messages In This Thread
RE: Adding motion / tilt sensors to CMA vehicles - by Power6 - 09-24-2023, 02:13 AM

Forum Jump:


Users browsing this thread: 8 Guest(s)