09-13-2023, 09:58 AM
I don't have a clue nor the courage to test Run-off road Mitigation -> 316 (emergency lane keeping aid) Setting: 02 
But for below, It's easy to test. You should see a beeping sound, a red car symbol flashing on the dash and finally if you continue it applies breaks.
Oncoming Lane Mitigation -> 317 (evasive manoeuvre assist) Setting: 02
Oncoming Mitigation by Braking -> 322 (cms incoming) Setting: 02
Let's say you have a car in front of you and it's about to stop or already stopped but you have a decent distance in between. In normal scenario you'd apply little bit break or leave the gas pedal and let the car slow down by itself.
So to test, after a shorth while leaving the gas, but you still have distance to stopped car in front of you, hit the gas and accelerate rapidly, you should here the sound and eventually automatic breaking momentarily. Before attempting to test, check your central display, if you have the collision avoidance enabled.
But for below, It's easy to test. You should see a beeping sound, a red car symbol flashing on the dash and finally if you continue it applies breaks.
Oncoming Lane Mitigation -> 317 (evasive manoeuvre assist) Setting: 02
Oncoming Mitigation by Braking -> 322 (cms incoming) Setting: 02
Let's say you have a car in front of you and it's about to stop or already stopped but you have a decent distance in between. In normal scenario you'd apply little bit break or leave the gas pedal and let the car slow down by itself.
So to test, after a shorth while leaving the gas, but you still have distance to stopped car in front of you, hit the gas and accelerate rapidly, you should here the sound and eventually automatic breaking momentarily. Before attempting to test, check your central display, if you have the collision avoidance enabled.