09-05-2023, 03:40 AM
(09-02-2023, 08:19 PM)plundra Wrote: Tried changing from 03 (Front+rear) to 04 (Semi-auto) today without luck. Got the "Park Assist System Unavailable; Service Required".
This was on a V60CC -19 with 360 cameras and 6 sensors in the front, four in the front and one on each side.
Had my doubts :-) Not having seen hard confirmation from anyone about it working, and the setting being in the "Show all" group only.
Anyway, fun to try, got my hopes up when the buttons showed up and "Park Out" said it just supported parallel parking, but when driving away I got the error on the dashboard instead.
you need 6 sensors at the back and 6 at the front. It's strange though that you have 6 at the front but none at the back from the factory.
check this out. If you enable the park assist pilot without all 12 sensors, you will get a warning and the regular park assistance will not work either.
If you have 4 at the back already, this means you will need to add 2 more (1 at each side.) and connect them to the CEM.
Now, the part number 32261312 in the guide no longer includes the wiring and the harness. It only includes the sensors (4), the plastic holders, zip ties, firewall plastics.
You'll need to wire them yourself like I did.