08-23-2023, 12:24 AM
(08-22-2023, 02:55 AM)Power6 Wrote: You can't do that any more ;-) Since Volvo implemented "blocking" it's not possible to connect the car to VIDA with modified variant config ("Premium audio") and then reload the B&W amp. Your car will be blocked from ordering software due to the modified variant codes.
The amplifier you installed, if it's a used one, should already be loaded with software anyway. If you DO want to reload it for whatever reason, send me an email, I have the B&W amp software for the S60, you can flash to the AUD with OrBit.
The B&W amp in the S60, is shared with the XC60, I beleive both use the same software loaded on the amp. Probably tuning for the specific interior XC60/S60/V60 is adjusted by reading the config.
Thank you, much appreciated.
Yes, mine is used one. I purchased it from ebay seller and I don't recall if it's out from XC60 or XC90 but it works just fine without any issues or codes.
I guess, I will need to put back the HK before going to service. Do you recommend reverting all the changes back to original in Orbit too or installing original amplifier would be enough?