08-08-2023, 06:04 PM
(This post was last modified: 08-08-2023, 06:06 PM by glennda5id.)
(08-06-2023, 11:02 PM)sags95 Wrote: Copied some settings that I found on another thread for the XC40 Recharge, since the Polestar 2 and XC40 Recharge have near identical software stacks and specs I figured the exact settings would also apply to the Polestar 2.
I have a MY23 with no packs, so I applied the following settings and it's worked wonderfully for me after some testing.
023 Cruise Control: 04 Adaptive cruise control stop & go level 1
314 Adaptive Cruise Control Version: 02 ACC version 2
145 Traffic Jam Assist: 05 With Traffic Jam Assist, Level 4
I spoke too soon. On my 2016 XC90, the ECU does not like 145:05. It throws a code for incompatible configuration. Seems the ECU programming is aware of the Pilot Assist Programming which makes sense as they are all working together. I would prefer a valid ECU config, so I have had to revert 145 back to 03 (Level 2). I also tried 145:04 and that did not work.
So I am running 023:01, 314:02 and 145:03
There were no codes displayed on speedo screen/dash. Only ECU module was complaining.