Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CEM and VGM not found
#7
I always have trouble matching all the screen names to the emails to support, but we may have gotten this one.

The issue I think we have is when using a USB Ethernet adapter. There is no problem with that, it works fine for VIDA and OrBit. But wireshark, it seems doesn't treat the device like an installed network adapter. So when you start a capture, either those communications are missed, or the capture is of the "USB communications" rather than the network.

If you have this specific issue, you use a USB adapter and OrBit doesn't find PINs in a proper capture. you can send your wireshark file to me at support email, I will see if I can pull the information out from the USB capture, I have been able to do it and crack the PINs. Obviously I don't want to make that a regular thing hehe, I am thinking about how to handle it, I need to find my USB Ethernet adapter around here somewhere and do some testing with Wireshark to see if there is a pocess to properly capture. Or I am looking at if I could simply make OrBit handle the USB capture log since the info is in there.
Reply


Messages In This Thread
RE: CEM and VGM not found - by BeachBoy - 06-22-2023, 02:22 AM
RE: CEM and VGM not found - by joepro - 06-22-2023, 08:28 PM
RE: CEM and VGM not found - by joepro - 06-23-2023, 01:10 PM
RE: CEM and VGM not found - by VOLVO-pan - 06-23-2023, 04:08 PM
RE: CEM and VGM not found - by max2770 - 07-06-2023, 04:20 PM
RE: CEM and VGM not found - by Power6 - 07-06-2023, 04:36 PM
CEM and VGM not found - by BeachBoy - 07-07-2023, 02:53 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)