Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding 110/230V POWER OUTLET TUNNEL (VDN code: PG03)?
#4
I mean this outlet, I have 12V outlet as well, it was coming from factory
   

This is part number I used, its for EU cars

   

as per information I managed to find:

- it should be powered via fuse #2 (CF02) in passenger side fusebox (red wire)
- negative cable connected to the bolt under passenger seat (black wire)
- it should have connection to CEM to pin EN35 (gray wire, LIN)
- it should be somehow linked to relay BR5 in engine fuse box (CON6 1) (gray wire)

From first glance all wiring and exist, fuse #2 is also installed, what I am not sure is: connection to engine fuse box relay, and CEM (but I see that gray wire comes out of console)

This is diagram I have, its from V60 MY21, (i dont have USB ports pn my XC60 MY20), but in general it shows wiring

   

   

   

This in addition to above
   

   


.pdf   Electrical Distribution Outlets.pdf (Size: 245.45 KB / Downloads: 13)
Reply


Messages In This Thread
RE: Adding 110/230V POWER OUTLET TUNNEL (VDN code: PG03)? - by KentXRS - 05-25-2023, 06:25 AM

Forum Jump:


Users browsing this thread: 5 Guest(s)