03-23-2023, 10:40 PM
A major update of OrBit is out, v.0.4.0. As always, latest version can be downloaded here: https://spaycetech.azurewebsites.net/orb...e/download
CMA models with "no BCM" like XC40 non-hybrid are supported now (these were already functional but bugs have been found and fixed for these models)
New features:
Car Status updated on "Shortcuts" tab - New status display for connected car with existing and new:
EPB Status - parking brake service status, click to enable service mode (*new* override to disable service mode, if the mode is incorrectly reported)
Config Status - "OK" or "Config Error" based on any invalid config reported from the CEM
Operation Mode - Shows current operation mode of car, click to change
Last Service - Days since last service (since maintenance reminder was reset)
Service functions moved to new "Service" tab - ABS Config Clear moved and new functions added:
Maintenance Reset - Reset the maintenance interval when performing your own service or serviced by a shop without VIDA
Oil Level reset - Reset the oil level adaptations in the ECM, when performing your own oil changes, to prevent false warnings for oil level after replacement.
Reset Battery History - See the days in service for the battery, and reset it when replacing 12V batteries.
Easy Ingress/Egress seat offsets edit - allows changing the distance the driver's seat slides back and/or down when the car is configured with "easy ingress/egress"
TPMS Sensor ID edit - See and edit the TPMS sensor IDs used when the car is configured with the sensor type TPMS (Sensor TPMS can be configured on all Sensus based SPA)
Air Suspension Calibration - This feature is experimental for those with Air Susp to test setting the car up to measure wheel heights. Once some data is collected the ability to input the heights and calibrate, as well as "lower" or "raise" the normal height of the car, will be added to OrBit.
SRS History Clear - Run the history clear after air bag deployment on a crashed car (works only on some models/years/markets)
(Greyed out button) Brake Bleed activation for hybrid "brake by wire" system, coming soon!
Other new features:
Send Cmd to ECU - On ECU Tools tab, you can send raw commands to an ECU and receive a report with the reply. Changing session and using Security Access is supported. This is useful for advanced users familiar with UDS diagnostics, but also useful for support of OrBit, to troubleshoot issues, or work with users to collect data for new features.
Expanded advanced settings for OrBit - On "Experts Toolbox" tab, new features have been added for experience users or as directed by OrBit support for troubleshooting. Post programming process can be skipped when flashing, VGM Unlocks can be skipped, and a button can be used to "Send Log now" to force OrBit uploading the latest log to the OrBit server when working with support.
SW version settings added to config - *Advanced User Only* Checkbox on "Experts Toolbox" tab enables items 380, 381, and 383 in Configurator. These items allow setting the SW version in config. On Android cars this can control the version reported in the car, to allow running earlier version of the system without getting "update" prompts. Useful for those who have Google Services installed "unofficially", who want to avoid getting prompted for, or running, a system update.
Fixes and Improvements:
New message prompt that allows creating a car profile right away when connecting a new car
Bug fix: "Software version" not reported correctly in Android system if updated OTA while using OrBit config. When this happens it can cause Android system version to be reported incorrectly. OrBit now flashes config that always passes through the current version from variant codes
Bug fix: Some CMA chassis models do not have a BCM module and brake system commands fail. OrBit now recognizes to use the VDDM for brake commands on these models and skips ABS Clear config (not supported or required on these models)
Bug Fix: DID read errors for some DIDs. When Security Access is required but session required from info database is default. OrBit now uses extended session if supported for DIDs that require security access.
Known Issues:
CMA models without BCM (i.e. non hybrid XC40) are now supported, except for EPB service status does not report correctly (always shows as "OFF"). Service mode can still be controlled for brake pad replacement, when disabling (back to normal mode) use the "OVERRIDE" to turn service mode to OFF.
Pre-2020 T8 will fail to flash if HV Battery contactors are not in "open" state. Discovering the contactor control process for these models is still in process. Flashing is safe, OrBit just lacks the convenience to control the state when required on these models.
CMA models with "no BCM" like XC40 non-hybrid are supported now (these were already functional but bugs have been found and fixed for these models)
New features:
Car Status updated on "Shortcuts" tab - New status display for connected car with existing and new:
EPB Status - parking brake service status, click to enable service mode (*new* override to disable service mode, if the mode is incorrectly reported)
Config Status - "OK" or "Config Error" based on any invalid config reported from the CEM
Operation Mode - Shows current operation mode of car, click to change
Last Service - Days since last service (since maintenance reminder was reset)
Service functions moved to new "Service" tab - ABS Config Clear moved and new functions added:
Maintenance Reset - Reset the maintenance interval when performing your own service or serviced by a shop without VIDA
Oil Level reset - Reset the oil level adaptations in the ECM, when performing your own oil changes, to prevent false warnings for oil level after replacement.
Reset Battery History - See the days in service for the battery, and reset it when replacing 12V batteries.
Easy Ingress/Egress seat offsets edit - allows changing the distance the driver's seat slides back and/or down when the car is configured with "easy ingress/egress"
TPMS Sensor ID edit - See and edit the TPMS sensor IDs used when the car is configured with the sensor type TPMS (Sensor TPMS can be configured on all Sensus based SPA)
Air Suspension Calibration - This feature is experimental for those with Air Susp to test setting the car up to measure wheel heights. Once some data is collected the ability to input the heights and calibrate, as well as "lower" or "raise" the normal height of the car, will be added to OrBit.
SRS History Clear - Run the history clear after air bag deployment on a crashed car (works only on some models/years/markets)
(Greyed out button) Brake Bleed activation for hybrid "brake by wire" system, coming soon!
Other new features:
Send Cmd to ECU - On ECU Tools tab, you can send raw commands to an ECU and receive a report with the reply. Changing session and using Security Access is supported. This is useful for advanced users familiar with UDS diagnostics, but also useful for support of OrBit, to troubleshoot issues, or work with users to collect data for new features.
Expanded advanced settings for OrBit - On "Experts Toolbox" tab, new features have been added for experience users or as directed by OrBit support for troubleshooting. Post programming process can be skipped when flashing, VGM Unlocks can be skipped, and a button can be used to "Send Log now" to force OrBit uploading the latest log to the OrBit server when working with support.
SW version settings added to config - *Advanced User Only* Checkbox on "Experts Toolbox" tab enables items 380, 381, and 383 in Configurator. These items allow setting the SW version in config. On Android cars this can control the version reported in the car, to allow running earlier version of the system without getting "update" prompts. Useful for those who have Google Services installed "unofficially", who want to avoid getting prompted for, or running, a system update.
Fixes and Improvements:
New message prompt that allows creating a car profile right away when connecting a new car
Bug fix: "Software version" not reported correctly in Android system if updated OTA while using OrBit config. When this happens it can cause Android system version to be reported incorrectly. OrBit now flashes config that always passes through the current version from variant codes
Bug fix: Some CMA chassis models do not have a BCM module and brake system commands fail. OrBit now recognizes to use the VDDM for brake commands on these models and skips ABS Clear config (not supported or required on these models)
Bug Fix: DID read errors for some DIDs. When Security Access is required but session required from info database is default. OrBit now uses extended session if supported for DIDs that require security access.
Known Issues:
CMA models without BCM (i.e. non hybrid XC40) are now supported, except for EPB service status does not report correctly (always shows as "OFF"). Service mode can still be controlled for brake pad replacement, when disabling (back to normal mode) use the "OVERRIDE" to turn service mode to OFF.
Pre-2020 T8 will fail to flash if HV Battery contactors are not in "open" state. Discovering the contactor control process for these models is still in process. Flashing is safe, OrBit just lacks the convenience to control the state when required on these models.
Thanks for putting all that time in @Power6