Retrofitted 12.3 inch DIM with error code

[ElMyggo]

Hi
I have replace my 8 inch DIM with 12.3 inch and then change parameter 157 to 02 and also activate navigation
and everythings seems to working ok but i get this error code from DIM:

**OrBit DTC Report for YV1PW68BCH1021951 (last read: 2025/10/05 15:24:02)**
DIM-U230056 - 2025/10/05
  Central Configuration- System Programming Failures- Invalid / incompatible configuration

12.3 inch DIM come from this car:
YV1PW68BCH1020452 and Art number 31687123

I notice that i had a alarm for air suspension at first startup but after change parameter and restart i have never seen that again, donor car probably have air suspension but i havent..

Must i change some configuration in the DIM? and how?

[leandro.vitali]

There are incompatible settings active. You should find out what they are and disable them.

[ElMyggo]

This is what i modify, can it be other config in the car that should be changed? the car is a former police car so there is many configs that isnt same as a standard car.

[x119]

That's a lot of changes. 

Suggest revert to OEM. Change DIM settings and then apply in series from there.