Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Volvo xc40 amplifier
#1
(P)32265284AA hi. my volvo xc40 bought in italy only has 2 speakers in the front doors. I want to expand it. I have an active orbit and after changing the configuration to a higher volume, there is no signal. only for those two speakers. the amplifier number is attached. it's sad so little gear. can you advise me?
Reply
#2
(01-07-2025, 06:13 AM)Lukas Wrote: (P)32265284AA        hi.  my volvo xc40 bought in italy only has 2 speakers in the front doors.  I want to expand it.  I have an active orbit and after changing the configuration to a higher volume, there is no signal.  only for those two speakers.  the amplifier number is attached.  it's sad so little gear.  can you advise me?

As i good remember there is a point in configuration where You can change speakers quantity, maybe this is the point.

"there is no signal" - as i understand there is no signal out on amplifier for others speakers, that was Your point?
Reply
#3
I have tried all options for the number of speakers.  no change.  when testing the last green connector, there is sound only on the 1st and 3rd pin.  otherwise without sound.  I also changed channel 028, all four configurations.  without change
Reply
#4
can configuration 451 solved my problem?
Reply
#5
(01-07-2025, 12:11 PM)sprocket Wrote:
(01-07-2025, 06:13 AM)Lukas Wrote: (P)32265284AA        hi.  my volvo xc40 bought in italy only has 2 speakers in the front doors.  I want to expand it.  I have an active orbit and after changing the configuration to a higher volume, there is no signal.  only for those two speakers.  the amplifier number is attached.  it's sad so little gear.  can you advise me?

As i good remember there is a point in configuration where You can change speakers quantity, maybe this is the point.

"there is no signal" - as i understand there is no signal out on amplifier for others speakers, that was Your point?
so no it didn't help 451. no sound at all.  only channels 1 and 3.  the amplifier that I bought has cables for 5 channels.  but it cannot be started.  only the 1st and 3rd channels are working.  I don't understand why.
Reply
#6
(01-11-2025, 07:02 PM)Lukas Wrote:
(01-07-2025, 12:11 PM)sprocket Wrote:
(01-07-2025, 06:13 AM)Lukas Wrote: (P)32265284AA        hi.  my volvo xc40 bought in italy only has 2 speakers in the front doors.  I want to expand it.  I have an active orbit and after changing the configuration to a higher volume, there is no signal.  only for those two speakers.  the amplifier number is attached.  it's sad so little gear.  can you advise me?

As i good remember there is a point in configuration where You can change speakers quantity, maybe this is the point.

"there is no signal" - as i understand there is no signal out on amplifier for others speakers, that was Your point?
so no it didn't help 451. no sound at all.  only channels 1 and 3.  the amplifier that I bought has cables for 5 channels.  but it cannot be started.  only the 1st and 3rd channels are working.  I don't understand why.

Did you change the configuration of the audio equipment? So, option 028?
- MY2020 V60 T8 Polestar Engineered, Full options
Reply
#7
yes.  i tried all 4 options.  without change.
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)