Adaptive headlights problem on xc60 2019 ( not bending , full led )

[vlad.purece]

Attached below is a video of my high beam headlights on auto mode, why is it dimming down the low beam instead of being brighter on the side where there are no cars?
I have to mention that the car was factory with only auto on/off high beam, I added from orbit to be adaptive with high beam in small vilage

https://youtube.com/shorts/1FX6x4o4SlY?s...vnf0ljfmh3

[marinalin85]

Attached below is a video of my high beam headlights on auto mode, why is it dimming down the low beam instead of being brighter on the side where there are no cars?
I have to mention that the car was factory with only auto on/off high beam, I added from orbit to be adaptive with high beam in small vilage

Correction, it doesn't work to add the video..

Upload it to YT

[vlad.purece]

Here it is
https://youtube.com/shorts/1FX6x4o4SlY?s...vnf0ljfmh3

[vlad.purece]

Attached below is a video of my high beam headlights on auto mode, why is it dimming down the low beam instead of being brighter on the side where there are no cars?
I have to mention that the car was factory with only auto on/off high beam, I added from orbit to be adaptive with high beam in small vilage

Correction, it doesn't work to add the video..

Upload it to YT

https://youtube.com/shorts/1FX6x4o4SlY?s...vnf0ljfmh3

[marinalin85]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

[vlad.purece]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

The first time I changed from ORBIT software from automatic on/of to adaptive long beam, I saw that it didn't work.
Then yesterday, I also changed something to the headlight type, from what I saw on the forum ( I leave the picture below ) and it still didn't work.
It seems like it turns on all the bulbs when I turn the high beam on.
Now I put the factory settings with automatic high beam on/off and they work perfect. 
I also leave the picture below with the stiker on the headlight.
If you have any other ideas I look forward to hearing back.

[vlad.purece]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

I will try this settings, maybe it will work.

[vlad.purece]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

I will try this settings, maybe it will work.

Not working,  full of errors,  it was a bad idea..

[paunionutz]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

I will try this settings, maybe it will work.

Not working,  full of errors,  it was a bad idea..

You don't have FULL LED headlamps, you have MID LED. In prder to work, you need to change the headlamps, with FULL LED, complete with modules

[vlad.purece]

Looks like there is an issue with your high beam module
Check from outside if all beams are on when high beam is active
Did you use orbit to do any changes?

I will try this settings, maybe it will work.

Not working,  full of errors,  it was a bad idea..

You don't have FULL LED headlamps, you have MID LED. In prder to work, you need to change the headlamps, with FULL LED, complete with modules

This is very sad. When I bought the car, I saw on the inside of the headlight it said "FULL LED SYSTEM" and thought it was the full headlight.
Too bad it's pretty hard with volvo to figure out what type of headlight the car has before you get it.
Thanks for the reply !