Best settings for full LED lights?

[BellevilleV70]

I have an early 22 XC60 PE, Canadian spec, so it has the full LED bending(low beam) lights. What are you folks finding are the best settings ?  Stock now, I find it way to sensitive to turning off highbeams , from porch lights, street lights etc. I have read through a bunch of posts, but most seem to be trying different settings due to not having the full LED lights.

[IMAY2023]

I swap from mid led to full led and I set them 
Bending (high and low)
Adaptive (high in small village) 
I Turn on the auto high beams and I like them pretty much.  It's not like pixel lights but they are moving around dimming in / out even driving straight forward according to oncoming traffic.

[WunderWagen]

I would also recommend changing the Headlight Type (106) to Type B ROW High Range, this allows the adaptive setting to remain on even after a vehicle restart.

[Pau1ey]

I would also recommend changing the Headlight Type (106) to Type B ROW High Range, this allows the adaptive setting to remain on even after a vehicle restart.

If you make this change be aware it also disables the amber side markers.

[BellevilleV70]

Thanks folks!

[ChainedAlice]

I would also recommend changing the Headlight Type (106) to Type B ROW High Range, this allows the adaptive setting to remain on even after a vehicle restart.

If you make this change be aware it also disables the amber side markers.

Do you mean the ones on the mirrors?

[Pau1ey]

I would also recommend changing the Headlight Type (106) to Type B ROW High Range, this allows the adaptive setting to remain on even after a vehicle restart.

If you make this change be aware it also disables the amber side markers.

Do you mean the ones on the mirrors?

No, the sides of the US spec headlamps