OrBit Forums › Diagnostics and Maintenance › Service Functions v
Rear brakepad change

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Rear brakepad change
cholo07 Offline
Junior Member
**
Posts: 19
Threads: 7
Joined: Aug 2023
Reputation: 0
#1
03-07-2024, 09:43 AM
Hi
How do i use Orbit when i change rear brakepads, can somebody tell me when i shall release the EPB whit Orbit.
Volvo XC60 2020 D4 AD-Blue
Find
Reply
danthe88 Offline
Member
***
Posts: 71
Threads: 3
Joined: Nov 2023
Reputation: 2
#2
03-07-2024, 09:59 AM
Release the parking brake from the car, then start maintenance mode from Orbit... After replacing, exit maintenance mode.
Find
Reply
IMAY2023 Offline
Posting Freak
*****
Posts: 846
Threads: 8
Joined: Feb 2023
Reputation: 70
#3
03-08-2024, 12:38 AM
In addition, there is a setting in the menu to engage parking upon engine shut off. Disable that first and then put the brakes on maintenance mode from Orbit.
Find
Reply
cholo07 Offline
Junior Member
**
Posts: 19
Threads: 7
Joined: Aug 2023
Reputation: 0
#4
03-08-2024, 01:26 PM (This post was last modified: 03-08-2024, 01:27 PM by cholo07.)
IMAY2023In addition, there is a setting in the menu to engage parking upon engine shut off. Disable that first and then put the brakes on maintenance mode from Orbit.

Thx
(03-07-2024, 09:59 AM)danthe88 Wrote: Release the parking brake from the car, then start maintenance mode from Orbit... After replacing, exit maintenance mode.

Thx
Volvo XC60 2020 D4 AD-Blue
Find
Reply
Jrock123 Offline
Junior Member
**
Posts: 3
Threads: 1
Joined: Feb 2024
Reputation: 0
#5
03-09-2024, 04:05 AM
What's does the maintenance mode in Orbit do? I've replaced the rear brakes on my MY16 XC90 and all I did was disable the parking break in the Sensus menu first and had no issues.
Find
Reply
BeachBoy Offline
Moderator
*****
Posts: 261
Threads: 11
Joined: Feb 2023
Reputation: 38
#6
03-09-2024, 02:53 PM
You can up the piston using a 9V battery.
You can also do it with a wrench.

Both methods can be seen on YouTube

It's a very quick job to change rear pads

Sent from my Pixel 7 Pro using Tapatalk
Full list of config items
Find
Reply
Marcp Offline
Member
***
Posts: 76
Threads: 1
Joined: Feb 2024
Reputation: 2
#7
08-05-2024, 10:00 AM
Hi, is the same procedure for the front pads?
Or is it not necessary to unlock the brake?
Find
Reply
x119 Offline
Administrator
*******
Posts: 333
Threads: 4
Joined: Jan 2023
Reputation: 41
#8
08-05-2024, 11:31 AM
(08-05-2024, 10:00 AM)Marcp Wrote: Hi, is the same procedure for the front pads?
Or is it not necessary to unlock the brake?

No EPB on front, not necessary.
Find
Reply
exhaustedvolvo Offline
Junior Member
**
Posts: 5
Threads: 1
Joined: Oct 2024
Reputation: 0
#9
01-08-2025, 01:04 PM
(03-09-2024, 02:53 PM)BeachBoy Wrote: You can up the piston using a 9V battery.
You can also do it with a wrench.

Both methods can be seen on YouTube

It's a very quick job to change rear pads

Sent from my Pixel 7 Pro using Tapatalk

Newbie here with brakes- would enabling maintenance mode for the parking brake on OrBit not just retract the piston?
Find
Reply
waloha73 Offline
Junior Member
**
Posts: 7
Threads: 0
Joined: Apr 2023
Reputation: 4
#10
01-08-2025, 05:59 PM
(01-08-2025, 01:04 PM)изнуренныйvolvo Wrote:
(03-09-2024, 02:53 PM)BeachBoy Wrote: Вы можете поднять поршень, используя 9-вольтовую батарею.
Вы также можете сделать это с помощью гаечного ключа.

Оба метода можно увидеть на YouTube.

Это очень быстрая работа по замене задних колодок.

Отправлено с моего Pixel 7 Pro с помощью Tapatalk

Новичок в тормозной сфере. Включение режима обслуживания стояночного тормоза на OrBit не приведет к простому втягиванию поршня?
https://youtu.be/pny96-Jyy1w?si=VhhFN_zCioVaOFdF
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)