Posts: 18
Threads: 6
Joined: Aug 2023
Reputation:
0
Hi
How do i use Orbit when i change rear brakepads, can somebody tell me when i shall release the EPB whit Orbit.
Volvo XC60 2020 D4 AD-Blue
Posts: 49
Threads: 1
Joined: Nov 2023
Reputation:
1
Release the parking brake from the car, then start maintenance mode from Orbit... After replacing, exit maintenance mode.
Posts: 570
Threads: 8
Joined: Feb 2023
Reputation:
53
In addition, there is a setting in the menu to engage parking upon engine shut off. Disable that first and then put the brakes on maintenance mode from Orbit.
Posts: 18
Threads: 6
Joined: Aug 2023
Reputation:
0
03-08-2024, 01:26 PM
(This post was last modified: 03-08-2024, 01:27 PM by cholo07.)
IMAY2023In addition, there is a setting in the menu to engage parking upon engine shut off. Disable that first and then put the brakes on maintenance mode from Orbit.
Thx
(03-07-2024, 09:59 AM)danthe88 Wrote: Release the parking brake from the car, then start maintenance mode from Orbit... After replacing, exit maintenance mode.
Thx
Volvo XC60 2020 D4 AD-Blue
Posts: 3
Threads: 1
Joined: Feb 2024
Reputation:
0
What's does the maintenance mode in Orbit do? I've replaced the rear brakes on my MY16 XC90 and all I did was disable the parking break in the Sensus menu first and had no issues.
Posts: 224
Threads: 10
Joined: Feb 2023
Reputation:
35
You can up the piston using a 9V battery.
You can also do it with a wrench.
Both methods can be seen on YouTube
It's a very quick job to change rear pads
Sent from my Pixel 7 Pro using Tapatalk
Posts: 51
Threads: 1
Joined: Feb 2024
Reputation:
0
Hi, is the same procedure for the front pads?
Or is it not necessary to unlock the brake?