Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
US Spec 2023 V60 Polestar Engineered Config Settings
#1
Below are some settings that I’ve tested on my car, a US-spec 2023 V60 Polestar Engineered. This may provide a good starting point for new Orbit users with a 2023 or 2024 US spec S60, V60 or XC60 Polestar Engineered cars. I’ve not included any LED headlight settings since I preferred the US default headlight configs.

#025 SEAT HEAT CALIBRATION: OEM setting ="6"; I set mine to 1 to lower seat temps, but anything above 6 should raise the seat temps for each of the three heating levels

#068 PANIC FUNCTION: (key button) Set to Function only with light verses light and sound

#121 HEADLIGHT CLEANING OPTION: I’m leaving this at the default for the winter months but will set to "Without Headlight Cleaning" in the spring

#144 DISTANCE ALERT: This eliminates the amber "too close" icon in the drivers display

#158 HEAD UP DISPLAY… UNCHANGED - I tried several and they looked similar but OEM "Graphic 3" setting was required to retain the google turn by turn info

#159 SAFETY BELT REMINDER: Set to Belt Minder front seats only, EU logic to let me start the car before belting up

#323 REAR AUTOMATIC EMERGENCY BRAKING: Set to 01, Without Braking (needed for reversing out of my garage without the car occasionally panic stopping); Disable button still comes up on screen when reversing but I've confirmed that the auto rear braking function is disabled

#359 EXTERIOR SOUND: Set to Not Available to shut off low speed and reversing EV sounds - Must also use #371 as 359 does nothing by itself

#371 EXTERIOR SOUND SYSTEM: Set to "Without" and use with #359. Used by itself it will work, but will generate DTC and error message on startup (same as removing the external speaker fuse)

Edit: The external sounds could no longer be disabled after the 2.13 SW update via these settings alone, but as a workaround you can still remove the fuse and not get the “External Sound Malfunction” message each time you start the car
Reply
#2
Great Info

Here is my setting so far. MY2024 V60CC in Asia

17 Road Sign Information - Appear in IHU but not work (May be we don't use google map)
37 Gear Indicator -  It works when you use "M"
43 Max Vehicle Speed Limitation - It works
96 Audiable Locking Feddback - It works
107 DRL - Off when turns to "0" works
149 Road Sign Information  - Menu appear in IHU but not work no cluster no HUD (May be we don't use google map in our region)
154 Front Parking Camera - 360 Works
159 Belt Reminder - EU to US, since I really hate to hear that annoying sound
271 Stop Start Function Memory - Always off
374 Polestar Level - Amazing one

Please share w/ us if anything you've done!!
Reply
#3
(12-08-2023, 10:24 PM)STWAGguy Wrote: #121 HEADLIGHT CLEANING OPTION: I’m leaving this at the default for the winter months but will set to "Without Headlight Cleaning" in the spring

Have you played with this (Option 121) at all?  One of my washers just started failing to retract, so being summer, I'm just going to disable them for now.
I know this thing can suck down a full gallon of fluid after reporting "low", so I'm wondering if the "large reservoir" setting is correct or not.  Have you seen any false low fluid alerts, or going dry without an alert with this setting changed either way?
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)