Retrofit Keyless Entry

[Marcp]

Hello! Thank you very much for confirming my debt. I'm leaving the pins I purchased here to help others.

- Terminal pin for CEM FL connector, original Volvo reference 30656698
- Terminal pin for CEM FO connector, verified IL-AG5-C1-5000
- Door handle connector
https://a.aliexpress.com/_EutQDTG
- Pins for the door module connector
https://a.aliexpress.com/_EQrzhXG
This one needs to be verified, but it's the same connector.
I'll confirm when I assemble it.

Thanks!

[hexaust]

How can I know if a door harness has keyless entry or not? For example this one:

[TweakeNL]

How can I know if a door harness has keyless entry or not? For example this one:

This one does have the plug for the handle. You can see it on the left side. It goes through the "door module" via that rubber grommet to the lock and the handle. (Handle is the small connector.)

[TweakeNL]

Do a continuity test between the handle connector and the CEM connector. Just ensure that everything is connected correctly.

Lights are separately controlled. Just the one communication wire to the CEM.

[Marcp]

Hi, guys! Is it normal that when there's a DTC on the front left lever, nothing works?

[TweakeNL]

Hi, guys! Is it normal that when there's a DTC on the front left lever, nothing works?

Yes, everything must be working OK, otherwise system will be deactivated.