Central lock switches rear doors V60

[Szigi]

I fitted  switches in my V60 rear doors, but on the right side is not working. I put the switch in the left side and the switch is ok.  The sitch is not illuminated,  it does nothing on the right side. Any ideea?
LE: i found the problem!  The robot who  made the  wiring loom, didn't install corect  pins in the connector. Instead of 1234, in my case was  5432 only in this connector. I inserted the pins corect, and now is working

I had the exact same issue on the right side of my 2020 V60. I'm not sure if it's a factory wiring defect, but in my case, the cables were in the right order, just plugged in backwards. Here is a picture of how the cable should be correctly wired.